Dual HEPA cartridges provide a full, delivered 1000 CFM airflow for FAST air cleaning, smoke removal, etc! Steel tube cart and heavy duty tires allow for easy transportation even in rugged environments. Front swivel wheels make maneuvering simple. Refresh the air by importing and filtering exterior air through the extra intake (2”D – with cap closure). Filters are easy to access for maintenance. Safety mesh covers the air outflow. Comes with two 8”D collars for ducted installations.
KEY FEATURES AND BENEFITS
Top Filter Access Panel and Intake with Handle – Panel slides and lifts without difficulty to access filters for maintenance.
Metal Mesh Prefilter on Intake – provides heavy duty large particulate filtering and protects the interior filters, extending ultrafine and VOC filtering performance.
2” Fresh Air Intake Port – allows for new external air to be filtered and introduced to the environment. Can be used to create a positively pressurized “safe-room” environment.
Right Side Directed Outflow – direct and redirect clean air as needed with the versatility of front swivel castors.
Sturdy Steel Tube Cart with Rugged Tires and Castors – navigate uneven terrain to bring clean air anywhere your work requires.
Steel Construction with Baked Thermoset Powder Finish – tough wear and tear resistant housing that doesn’t off-gas chemicals, true to the integrity of providing clean air!
Interior Filters – final 3 stages of filtration is contained and protected within a durable steel cabinet.
Perfect Seal Filter Configuration – Easy-Twist HEPA locks into place to ensure the filter is completely sealed in the unit and no polluted air leaks.
Dual Perfect Seal 3 Stage Filtration – two sets of filters capture large particulate and VOCs with the first stage foam prefilter, harmful and irritating particulate are trapped with the second stage HEPA filter that locks in place and chemical/gas pollution are adsorbed by the third stage carbon VOC filter.
Easy-Twist HEPA Cartridge – Filters are convenient to access and change with just a twist of the main HEPA Cartridge.
Standard Third Stage VOC Canister – 2 x 1550 g of granulated carbon provide vital capture of chemical and gas pollution.
Variable Speed Control – change the system rate of air flow to suit capture needs to the level of contaminants in the environment.
Detachable 12’ IEC Power Cord – conveniently removes for portability and storage.
Two High Efficiency AC Backward Curved Motors – for boosted dual performance air flow at a low running cost, minimal drain on electricity resources with years of continuous performance.
Ultra VOC Filter Upgrade – replaces the HEPA Cartridge with a 9475 g canister of granulated carbon for cases requiring extreme chemical and gas pollution capture. Replace one or two HEPA Cartridges. Customized treated Carbon fills available upon request.
Collared Intake Panel – allows for rigid or flexible ducting connection to configure targeted source capture of pollutants.
WHAT’S IN THE BOX?
1 – 7500 Portable HEPA Air Filtration Cart System
1 – 7500 Owner’s Manual
1 – 12’ IEC Power Cord
2 – 8”D Yellow Collar
Maximum Recommended Area Size: 60,000 ft3 (provides 1 ACH/hr)
Filter Life: Prefilter – 12 months
HEPA Filter – 3 to 5 years
Inner Carbon – 6 months
Filter Configuration: Dual Cylindrical Perfect Seal 3-Stage Cartridges (13” Diameter x 16” Height)
Stage One: 1/8” Foam Prefilter x2
Stage Two: 100 sq. ft. Pleated Easy Twist HEPA Cartridge x2
Optional Stage Two Canister: Granulated Carbon pellets incased in steel mesh canister (9475 g = 10,422,500 m2adsorption surface area)
Stage Three: ½” non-woven polyester filter media imbued 200% with Activated Carbon (164 g = 180,400 m2adsorption surface area) x2
Optional Stage Three Canister: Granulated Carbon pellets incased in steel mesh canister (1550 g = 1,705,000 m2adsorption surface area)
Airflow: 1000 CFM
Power Consumption: 320 W
Dimensions: 27”W x 40”L x 38”
Weight: 118 lbs
Control: Variable Speed Switch
Construction: 18 gauge steel housing, durable baked thermoset powder finish
Intake: 10” x 12” with metal mesh prefilter x2
Outflow: 8”D Round x2
Fresh Air Intake: 2” Round
Motor: Backward curved impeller
Voltage: 115 volt*
Cord/Plug: 12 foot detachable IEC cord with North American Type K Plug (3 pin grounded)
*available in most commercial voltages with standard plugs.
***LEAD TIME 6-8 WEEKS FROM DATE OF ORDER***